menulogo05x.gif (2403 bytes)

SSPS050 Serious R/C Servo
         
SSPS050g.jpg (3970 bytes)

  • 690 oz in stall torque @ 8.4 VDC

  • 580 oz in stall torque @ 7.2 VDC

  • 480 oz in stall torque @ 6 VDC

  • 350 oz in stall torque @ 4.8 VDC

  • .3 sec > 60 deg @ 6 VDC

  • +-70 degree trav

  • 2.98 x 1.75 x 3.16", 10 oz

  • Ball bearings

  • Futaba Servo Command Pulse
    compatible
1/4 SCALE MODELS !
With torque to spare!

ROBOTS: Real Wrist
Twistin' Power!

This rugged but small servo begins with a die cast metal case and builds from there.   It can accept up to 8.4 volts as power to achieve 690 oz in of stall torque.   The power has to come from somewhere so wire for peak currents of 4.5 amps @ 6 VDC.  The output shaft features double bearings for good life and has a 36 grove splined shaft allowing the included drive horn to be mounted in 10 degree increments.   Made by Tonegawa Seiko.
Part Number Description Size Wght Oz Min Volt Max Volt Qu A Max Amp Sec for 90deg Qty 1-3 Qty 4-19 Qty 20-49 Repair Dep
                         
SSPS050 Seiko 480 oz in Servo 2.98 X 1.75 X 3.16' 10 4.1 8.4 0 4 0.45 $194.95 $194.95 $194.95 $65.00
                         

Last Updated on 7/23/2004

 
Sales: (800) 882-6832

 Home Page

Note: Our products are not safety devices nor for use in life-critical or life support systems. Specifications and price subject to change without notice. Patented. Some trade names, trademarks & content owned by others.
Copyright 1998-2007 VANTEC, All Rights Reserved
460 Honeycutt Dr.  Grants Pass, OR 97526
 Switchboard: (541) 471-7135
FAX: (541) 474-3987  Email: Mailing Requirements@vantec.com
Enable JAVASCRIPT for best performance